Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 51)

AlliedView™-EMS 3.11 Device Management Guide Page 51 of 402
Note - The current firmware version returns a "noSuchName" value for the
following parameters:
o
Alignment Error Frames
o
Multi Collision Frames
o
SQE Test Errors
o
Deferred Transmissions
o
Excessive Collisions
o
Internal MAC Transmit Errors
o
Carrier Sense Errors
o
Symbol Errors
Additional Info
Displays information about a table containing 64-bit versions of error counters.
Note - The current firmware version is unable to display any value for the Port
Number and Alignment Error Frames (HC) parameters.
Note - The current firmware version returns a ‘noSuchName’ value for the Internal
MAC Transmit Errors (HC) and Internal MAC Received Errors (HC) parameters.
Detail Info
Displays detailed port information such as duplex mode.
Note - The current firmware version does not allow the following parameters to be
configured:
• Tagged Mode
• Default Priority
• Row Status
• Port Flow Control Config
• Port Speed
• Reactivate
• Combo Ethernet Config
Note - Device Manager does not handle 8-bit string parameters correctly. As a result,
the Autonegotiation Capabilities Config parameter will display an unrecognizable
value and will not be configurable. The Autonegotiation Capabilities Status and
Remote Autonegotiation Capabilities parameters will also display unrecognizable
values.
Note - The Physical Address Type parameter is not applicable to the AT-8000S
series and should be ignored.
Note - The combo ports will not display the Port Context Menu on right-mouse
click if logged-on in SNMPv3 mode using a user account with no read-write access
to the Transceiver Type parameter.