Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 232

AlliedView™-EMS 3.11 Device Management Guide
Page 232 of 402
Address Table
Displays the list of IP interfaces on the switch.
Route Number
Displays the IP routing number on the switch.
Route Table
Displays the IP routing table on the switch.
Note
- The current firmware version returns the value 'NULL' for the
Routing Protocol MIB parameter.
Note
- The following parameters are implemented as 'read-only':
• Destination Port Number
• Routing Type
• Nexthop AS Number
• Destination Metric 1
• Destination Metric 2
• Destination Metric 3
• Destination Metric 4
• Destination Metric 5
• Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note
- The Default TTL parameter is implemented as 'read-only'.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note
- The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.