Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 265)

AlliedView™-EMS 3.11 Device Management Guide Page 265 of 402
RPS Green
Gray
Yellow
An optional redundant power supply is connected to the switch and
is turned on.
There is no redundant power supply connected to the switch.
An optional redundant power supply is connected to the switch but
is turned off.
Note - The current firmware version is unable to detect the presence or absence of an XFP
module in any of the XFP slots. As a result, the XFP slots on the device image will always
show XFP images regardless of whether or not XFP modules are physically present in the
slots.
Note - When connecting to a slave switch, Device Manager does not automatically replace
the master switch image in the main window with the slave switch image. The same is true
when returning to the master switch from the slave switch. To view the updated image,
click on the Refresh option under the Agent menu.
Note - L2+ Models: Blocking ports will appear green instead of yellow when the Spanning
Tree Status parameter is set to "enabled" and the Spanning Tree Version parameter is set
to "rstp".
Note - L3 Models: Blocking ports will appear green instead of yellow when the Spanning
Tree Status parameter is set to "enabled".
Note - Status information for combo ports will always be reflected on both the RJ-45 port
images and the GBIC/SFP port images regardless of whether it is the RJ-45 or the GBIC/SFP
ports that are actually in operation. However, if Device Manager detects that the
established link speed is less than 1Gbps, only the RJ-45 port images will turn green.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - L3 Models: The current firmware version allows up to 38 characters for the
System Location parameter.
Network Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Device Info