Yokogawa Removable Chassis DX1000N - Manual (Page 84)

1-76
IM 04L41B01-17E
Disconnection
The connection is closed when:
• A command is sent that closes the connection.
The CC0 command is sent.
• A command that results in the exiting of basic setting mode has been executed.
If you log in to the setting function and initialize the setup data (EC command), load
settings (YO command), or close system mode (YE command), the communication
connection is closed, along with other connections.
• The DX disconnects according to its automatic logout and communication timeout
settings.
When you are logged in, if you do not send commands for the specified time indicated
below, the DX will automatically log out and close the connection.
Specified time: The DX auto logout time (see section 2.1 in the Advanced Security
Function (/AS1) User’s Manual) or the communication timeout time (see section 1.3),
whichever is shorter.
• There is a communication error.
The connection is closed when there is a transfer error, a reception error, or when the
keepalive function times out (see “Setting/Measurement Server” in section 1.1).
Note
When the connection to the setting function is closed, the DX returns to the operation mode
screen, and the user is logged out.
1.12 Using the Setting/Measurement Server