Yokogawa Removable Chassis DX1000N - Manual (Page 117)

2-23
IM 04L41B01-17E
Using the Serial Interface
1
2
3
4
5
6
App
Index
Operation Log
Operations are recorded in the DX operation log. The operator is the user who was
logged in using the DX keys.
Barcode Readers
The DX recognizes the following barcode readers:
• Model name: MS9540-RS (RS-232 interface)
Maker: Metrologic Instruments Inc.
• Model name: LS1902T-RS (RS-232 interface)
Maker: Symbol Technologies Inc.
Because only a small number of characters can be specified in the header, the input
method may be limited when you use this barcode reader with the DX.
Operation Examples
This section contains operation examples.
Note
In this section, “CRLF” is used to indicate a terminator. For information about terminators,
see page 3-2.
Operation Example 1
Logging in with a User Name of ABC2001 and a User ID of 5555
While logged out, enter the command “BP2,ABC2001,5555CRLF” using barcodes. The
user name and user ID are entered, and a window for entering the password appears (you
have to use the keys to enter the password).
Note
• When you enter commands using bar codes, you can enter them separated or all at once.
You can separate commands however you want to. For instance, in example 1, you could
scan the data as indicated below:
“BP2” → “,”→“ABC2001”→“,”→“5555”→“CRLF”
• If you use a barcode reader that automatically attaches a footer and a header to every
transmission, set the header to “BP2,” the footer to “CRLF” and scan “ABC2001,5555.”
Operation Example 2
Entering into a Measurement Ready State with a Batch Number of
Process1 and a Lot Number of 0031
When recording has not been started, scan the command “BT1,Process1,0031;KESTAR
TCRLF” with the barcode reader.
The batch and lot number are set and the start window appears.
Operation Example 3
In setting mode, set the file header to “process sample.”
1. In the screen for setting the file header in setting mode, move the cursor to the box for
entering a character string.
After this, if you press the Input soft key and display the window for entering a character
string, you can still enter a character string with the barcode reader.
2. Use the barcode reader to enter “BV0,process sampleCRLF.”
The “Header” box is set to “process sample.”
2.9 Using Barcode Input (/AS1 option)