Yokogawa Removable Chassis DX1000N - Manual (Page 55)

1-47
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Note
• You can view the files by installing the provided DAQSTANDARD software on the PC and by
associating DAQSTANDARD with the files you want it to receive.
• Memory is linked to ftp://hostname/MEM0/DATA.
• Media is linked to ftp://hostname/DRV0/. The external storage medium is the CF card.
• You cannot retrieve data files that are being created.
• The display is not automatically updated. Perform the operation again if necessary.
Connecting from a PC via the FTP
An example of retrieving files using a browser is described below. In the Address box,
enter the following:
ftp://host name.domain name/file name
Drag the data you want to retrieve from the /MEMO/DATA0 folder in the case of internal
memory data or the /DRV0 folder in the case of data on the external storage medium to
the PC. You can also use the IP address in place of the “host name.domain name.”
When Using the Login Function (Standard)
You will be prompted for a user name and password when you access the server. Enter
a user name and password that are registered on the DX to connect to it. For information
about the operations that can be executed, see the explanation in section 1.1, “Login
(On DXs without the /AS1 advanced security option).” You cannot perform the operations
described under “Accessing Data Files from the Web Browser“ or “Connecting from a PC
via the FTP.”
When Using the Login Function on a DX With the /AS1 Advanced Security
Option
You can connect to the server using the user name “admin,” “user,” or “anonymous.” The
password is optional. You can only perform the operations that can be performed when
you log into a DX as “anonymous.” You cannot delete or change the names of files on
the server (the DX), nor can you transfer files to the server.
Port Number
The default value is 21. To change the setting,
◊ Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > Communication > Service port
For the selectable range of port numbers, see section 6.1.
1.6 Accessing the Measurement Data File on the DX from a PC