Yokogawa Removable Chassis DX1000N - Manual (Page 5)

iv
IM 04L41B01-17E
Conventions Used in This Manual
• Unit
• k: Denotes 1000. Example: 5 kg, 100 kHz
• K: Denotes 1024. Example: 640 KB
• Markings
The following markings are used in this manual.
Refer to corresponding location on the instrument. This symbol
appears on dangerous locations on the instrument which require
special instructions for proper handling or use. The same symbol
appears in the corresponding place in the manual to identify those
instructions.
WARNING
Calls attention to actions or conditions that could cause serious injury
or death to the user, and precautions that can be taken to prevent
such occurrences.
CAUTION Calls attentions to actions or conditions that could cause light injury
to the user or damage to the instrument or user’s data, and
precautions that can be taken to prevent such occurrences.
Note Calls attention to information that is important for proper operation
of the instrument.
• Bold characters
Bold characters are mainly characters and numbers that appear on the display.
The ◊ symbol indicates key and menu operations.
Models Covered in This Manual
This manual mainly describes the operating procedures on the DX1000. When the
procedures differ between the DX2000 and the DX1000, the procedures (including the
menu operation) on the DX2000 are also given.
High-Speed and Medium-Speed Model Groupings
This manual uses the terms high-speed input model and medium-speed input model to
distinguish between DX models as follows:
Model Type Model
High-speed input model DX1002, DX1004, DX1002N, DX1004N, DX2004, and MV2008
Medium-speed input model DX1006, DX1012, DX1006N, DX1012N, DX2010, DX2020, DX2030,
DX2040, and DX2048
How to Use This Manual