Yokogawa Removable Chassis DX1000N User Manual
Page 28
1-20
IM 04L41B01-17E
• Include source URL
Select
On to attach the source URL. Attach the URL when the Web server is enabled.
• Subject
Enter the subject of the e-mail using up to 32 alphanumeric characters. The default
setting is Alarm_summary.
• Header1 and Header2
Enter header 1 and header 2 using up to 64 characters.
• Send alarm action (Release number 3 or later)
To send e-mail when an alarm occurs and when it is cleared, select
On+Off. To only
send e-mail when an alarm occurs, select
On.
• Include tag/ch in Subject (Release number 3 or later)
Select
On to include a tag number in the subject. If the tag number is not set, the
corresponding channel number is included.
Scheduled Settings
Specify the settings for sending e-mail at scheduled times.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select
On to send e-mail or
Off to not send e-mail.
• Interval
Select the interval for sending e-mail to Recipient1 and Recipient2 from 1, 2, 3, 4, 6, 8,
12, and 24 hours.
• Ref. time
Enter the time used as a reference for sending the e-mail at the specified interval to
Recipient1 and Recipient2.
• Include instantaneous value, Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is Periodic_data.
System Settings
Specify the settings for sending e-mail when the DX recovers from a power failure, at
memory end, and when an error occurs.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select
On to send e-mail or
Off to not send e-mail.
• Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is System_warning.
Report Settings
Specify the settings for sending e-mail when reports are created.
• Recipient1 and Recipient2
Set the recipients. For Recipient1 and Recipient2, select
On to send e-mail or Off to
not send e-mail.
• Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is Report_data.
1.4 Sending E-mail Messages