3 connecting the dx, 3 connecting the dx -12, Connecting to the port – Yokogawa Removable Chassis DX1000N User Manual
Page 20
1-12
IM 04L41B01-17E
1.3 Connecting the DX
Connecting to the Port
Connector
Connect an Ethernet cable to the Ethernet port on the DX rear panel.
Ethernet cable
Do not connect an Ethernet cable
whose plug does not comply with
FCC specifications. If you do, the
DX may malfunction.
CAUTION
Connecting to the PC
Make the connection via a hub. For a one-to-one connection with a PC, make the
connection as shown in the figure below. Multiple DXs can be connected to a single PC
in a similar manner.
Hub
DX
Ethernet cable
PC
This manual is related to the following products: