Yokogawa Removable Chassis DX1000N - Manual (Page 182)

3-65
Commands
IM 04L41B01-17E
1
2
3
4
5
6
App
Index
3.10 Output Commands (Special
Response Commands)
*I Outputs instrument information
Syntax *I
Description This command sends the maker, model, serial
number, and firmware version in a comma-
separated ASCII string with a terminator at the
end.
Example YOKOGAWA,DX1000,99AA0123,F1.01
3.11 Maintenance and Test
Commands (Available when
using the maintenance/
test server function via
Ethernet)
close Closes another device’s
connection
Syntax close,p1,p2:p3
p1 Port on the DX side (1 to 65535)
p2 IP address on the PC side
(0.0.0.0 to 255.255.255.255)
p3 Port on the PC side (0 to 65535)
Example close,34159,192.168.111.24:1054
E0
Description You cannot use this command to disconnect a
server port. You cannot use this command to
disconnect from the DX that you are operating.
Use the quit command instead.
con Outputs connection information
Syntax con
Example
con
EA
00/00/00 12:34:56
Active connections
Proto Local Address Foreign Address State
TCP 192.168.111. 24:34159 192.168.111. 24:1053 ESTABLISHED
TCP 0. 0. 0. 0:34155 0. 0. 0. 0:
0 LISTEN
TCP 0. 0. 0. 0:34159 0. 0. 0. 0: 0 LISTEN
TCP 0. 0. 0. 0:34150 0. 0. 0. 0: 0 LISTEN
EN
TCP
Protocol used.
Local Address
DX socket address.
Displays “IP address:port number.”
Foreign Address
Destination socket address
Displays “IP address:port number.”
State
Connection state.
ESTABLISHED
Connection established.
eth Outputs Ethernet statistics
Syntax eth
Example
eth
EA
00/00/00 12:34:56
3.10 Output Commands (Special Response Commands) / 3.11 Maintenance and Test Commands