Yokogawa Removable Chassis DX1000N - Manual (Page 146)

3-29
Commands
IM 04L41B01-17E
1
2
3
4
5
6
App
Index
3.4 Setting Commands
p4 Reference time (hh; fixed format)
hh Hour (00 to 23)
When p2 is set to RELATIVE (relative timer)
Syntax TQ p1,p2,p3,p4
p1 Timer number
p2 Timer type (RELATIVE)
p3 Time (hh:mm; fixed format)
hh Hour (00 to 24)
mm Minute (00 to 59)
p4 Reset at computation start (OFF, ON)
Query TQ[p1]?
Example Set the timeout value of timer number 1 to 10
hours 30 minutes. Do not reset the timer when
computation is started.
TQ1,RELATIVE,10:30,OFF
Description • Set p1 by referring to the table in section 3.3.
• You cannot use this command while recording
(memory sampling) in progress. If you are
using the /BT2 multi batch option, you cannot
use this command if any of the batch groups
is recording (memory sampling).
• You can set up to 24:00 time when using a
relative timer.
TK Sets a match time timer
When p2 is set to OFF (disable the match time
timer)
Syntax TK p1,p2
p1 Timer number
p2 Timer type (OFF)
When p2 is set to DAY
Syntax TK p1,p2,p3,p4,p5
p1 Timer number
p2 Timer type (DAY)
p3 Day (1 to 28)
p4 Hour (hh:mm; fixed format; 00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
SINGLE Executes the action once when the
condition is met.
REPEAT Executes the action at every specified
time.
When p2 is set to WEEK
Syntax TK p1,p2,p3,p4,p5
p1 Timer number
p2 Timer type (WEEK)
p3 Day of week (SUN, MON, TUE, WED, THU,
FRI, SAT)
p4 Hour (hh:mm; fixed format; 00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
When p2 is set to MONTH
Syntax TK p1,p2,p3,p4,p5
p1 Timer number
p2 Timer type (MONTH)
p3 Day (1 to 28)
p4 Hour (hh:mm; fixed format; 00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
When p2 is set to YEAR
Syntax TK p1,p2,p3,p4,p5,p6
p1 Timer number
p2 Timer type (YEAR)
p3 Month (JAN, FEB, MAR, APR, MAY, JUN,
JUL, AUG, SEP, OCT, NOV, DEC)
p4 Day (1 to 31; varies depending on the
specified month)
p5 Hour (hh:mm; fixed format; 00:00 to 23:59)
p6 Timer operation (SINGLE, REPEAT)
Query TK[p1]?
Example Set timer number 2 to expire at hour 21 every
Thursday.
TK2,WEEK,THU,21:00,REPEAT
Description • Set p1 by referring to the table in section 3.3.
• You cannot use this command while recording
(memory sampling) in progress. If you are
using the /BT2 multi batch option, you cannot
use this command if any of the batch groups
is recording (memory sampling).
TU Sets an event action
When multi batch /BT2 is not in use
Syntax TU p1,p2,p3,p4,p5,p6,p7,p8
p1 Logic number (1 to 40)
p2 Event type
NONE
REMOTE
RELAY
Alarm output relay
SWITCH Internal switch
ALARM Alarm
TIMER Timer
MATCHTIMETIMER Match time
USERKEY USER key
EVENTLEVELSWITCH Event level switch
EVENTEDGESWITCH Event edge switch
RELAY-OFF Alarm output relay off
SWITCH-OFF Internal switch of f
ALARM-OFF Alarm off
EVENTLEVELSWITCH-OFF
Event level switch off
p3 Event details
p2=REMOTE Remote number
p2=RELAY Relay number
p2=RELAY-OFF Relay number
p2=SWITCH Internal switch number
p2=SWITCH-OFF Internal switch number
p2=TIMER Timer number