Yokogawa Removable Chassis DX1000N - Manual (Page 204)

4-20
IM 04L41B01-17E
DHCP Log
• The FL command is used to output the data.
• The DHCP log is output. Up to 50 accesses to the DHCP server are retained.
• Syntax
EACRLF
yy/mo/dd_hh:mm:ss_nnn_xxxxxxxxxCRLF
···································
ENCRLF
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Second (00 to 59)
nnn Error number (000 to 999)
Description given in the table.
xxxxxxxxx Detailed code (9 characters)
Description given in the table.
_ Space
The table below shows the contents of the log during normal operation.
Error Number Detail Code Description
562 ON Detected that an Ethernet cable was connected.
OFF Detected that an Ethernet cable was disconnected.
563 RENEW Requesting address renewal to the DHCP server.
RELEASE Requesting address release to the DHCP server.
564 RENEWED Address renewal complete.
EXTENDED Address release extension request complete.
RELEASED Address release complete.
565 IPCONFIG IP address configured.
566 NOREQUEST Configured not to register the host name.
567 UPDATE Registered the host name to the DNS server.
568 REMOVE Removed the host name from the DNS server.
4.2 Output Format of ASCII Data