Yokogawa Removable Chassis DX1000N - Manual (Page 48)

1-40
IM 04L41B01-17E
Daily and monthly reports
Plant Section 50 Industrial water
Daily report Start time: 2007/03/01 01:00:00
03/02 1:00:00
03/03 1:00:00
03/31 1:00:00
04/01 1:00:00
Please enter comments.
Monthly report Start time: 2007/03/01 01:00:00
04/01 1:00:00
Timeout time Minimum pump
volume [k] Maximum pump
volume [k] Average pump
volume [k] Integrated
pump volume [k] Flow rate
[m3]
Timeout time Minimum pump
volume [k] Maximum pump
volume [k] Average pump
volume [k] Integrated
pump volume [k] Flow rate
[m3]
• Setting the Report Layout
This item only appears on models with the computation function (/M1 or /PM1 option)
when the basic setting items are set as follows:
• The type of report to create is specified ( Report > Basic settings).
• Web server is set to Use (Communication (Ethernet) > Server > Server modes).
• The operator or monitor page is set to On (Communication (Ethernet) > Web
page).
◊ Press MENU (to switch to setting mode), and select the Menu tab > Web Report
Web Report No
You can configure 10 different report layouts. Set the number in the range of 1 to 10.
On/Off
Select On to use the layout.
Title
The report title. This title is used to select the layout when displaying reports on the
Web browser. Enter the title using up to 64 alphanumeric characters and symbols.
Item No (DX1000 and DX1000N only)
You can set up to 10 items. Select 1-5 or 6-10.
Item, Channel, Value, and Name
For each item number, set the report channel, computation type, and name to assign
to the item.
Enter the name using up to 16 alphanumeric characters and symbols.
For the procedure to configure the report, see section 9.5 in the DX1000/DX1000N or
DX2000 User’s Manual (IM04L41B01-01E or IM04L42B01-01E).
1.5 Monitoring the DX on a PC Browser