Yokogawa Removable Chassis DX1000N - Manual (Page 217)

4-33
IM 04L41B01-17E
Responses
1
2
3
4
5
6
App
Index
4.3 Output Format of Binary Data
This section describes the output format of the binary data.
For information on other binary data, see section 4.1.
• Instantaneous data (measured/computed/external input) and FIFO data
• Configured channel information data
• Configured alarm information data
• Manual sample file
• Report sample file
The measured data and computed data are output using signed 16-bit integer and
signed 32-bit integer, respectively. These integers can be understood as physical values
by adding the decimal point and the unit. The decimal point position can be determined
using the FE command.
Typical Examples to Obtain Physical Values from Binary Data
Binary Value Decimal Position Code Physical Value (Measured Value)
10000 0 10000
10000 1 1000.0
10000 2 100.00
10000 3 10.000
10000 4 1.0000
Note
The “CRLF” used in this section denotes carriage return line feed.