Yokogawa Removable Chassis DX1000N - Manual (Page 131)

3-14
IM 04L41B01-17E
Basic Setting Commands (/AS1)
• To apply settings that you have changed using the basic setting commands, you need
to save the settings using the YE command.
• The settings that are returned in response to a query in basic setting mode contain the
new settings even if they are not saved. However, the new settings are not activated
unless you save them.
• To configure login items, use the following commands:
RN, RP, EK, and EL
Note
The connection is closed when you execute the YE command. Commands listed after the
YE command are ignored.
Command
Name
Function Execution
Mode
Setting Connection Monitor
Connection
Page
Administrator User
WU Sets the environment B Yes No No 3-45
WE Sets calibration management B Yes No No 3-47
BI Configures signature settings B Yes No No 3-47
WO Sets alarm and DO settings B Yes No No 3-48
WH Sets alarm hysteresis B Yes No No 3-48
XV Sets the scan interval and A/D integral time B Yes No No 3-48
XB Sets burnout detection B Yes No No 3-49
XJ Sets RJC B Yes No No 3-49
XM Sets memory sampling conditions B Yes No No 3-49
XT Sets the temperature unit B Yes No No 3-49
RN Sets basic login B Yes No No 3-50
RP Sets user limitations B Yes No No 3-50
EK Configures administrator settings (/AS1 advanced
security option)
Bb Yes No No 3-50
EL Configures user settings (/AS1 advanced security
option)
Bb Yes No No 3-51
WD Configures authentication server settings (/AS1
advanced security option)
B Yes No No 3-51
RO Sets the type of report and when to create reports B Yes No No 3-51
RM Sets a report channel B Yes No No 3-52
XG Sets the time zone B Yes No No 3-52
XN Sets the date format B Yes No No 3-52
YB Sets host information B Yes No No 3-52
YD Sets network parameters B Yes No No 3-53
YA Sets the IP address, subnet mask, and default
gateway
B Yes No No 3-53
YK Sets keepalive B Yes No No 3-53
RU Sets DNS parameters B Yes No No 3-53
WS Sets a server B Yes No No 3-53
WW Sets Webpage parameters B Yes No No 3-53
YQ Sets communication timeout B Yes No No 3-53
YT Sets FTP transfer timing B Yes No No 3-54
YU Sets what kind of information to send using e-mail B Yes No No 3-54
YV Sets an e-mail recipient address B Yes No No 3-55
YW Sets the e-mail sender address B Yes No No 3-55
YX Sets the e-mail SMTP server name B Yes No No 3-55
YJ Sets the Modbus client’s destination server B Yes No No 3-55
YP Sets basic Modbus client settings B Yes No No 3-55
YR Sets the Modbus client’s transmit command B Yes No No 3-55
WB Sets SNTP client parameters B Yes No No 3-56
WC Sets the SNTP operation when memory start is
executed
B Yes No No 3-56
YS Sets the serial interface B Yes No No 3-56
YL Sets the operation of the Modbus master function B Yes No No 3-57
YM Sets a transmit command of the Modbus master
function
B Yes No No 3-57
WR Sets the instrument information output B Yes No No 3-58
3.2 A List of Commands