Yokogawa Removable Chassis DX1000N - Manual (Page 121)

3-4
IM 04L41B01-17E
3.2 A List of Commands
When the /AS1 Advanced Security Option Is Not in Use
DX Execution Modes
There are two execution modes on the DX. If you attempt to execute a command in a
mode that is different from the specification, a syntax error occurs. Use the DS command
to switch to the appropriate execution mode, and then execute the command. Query
commands can be executed in either mode.
•
Basic setting mode
Measurement and computation are stopped, and settings are changed in this mode.
•
Operation mode
As a general rule, commands other than those for the basic setting mode described
above are used in this mode.
Administrator and User
The administrator and user specifications in the table indicate the user level that is
specified using the login function for Ethernet communications.
“Yes” and “No” in the table indicate the following:
Yes: Command usable
No: Command not usable
Setting Commands
Note
If the multi batch function (/BT2 option) is enabled, you cannot use the SR, SO, SK, TJ, SW,
TE, SJ, ER,TQ, and TK commands unless all batch recording operations are stopped.
Group Command Function Execution Administrator User Page
Name Mode
SR Sets an input range Operation mode Yes No 3-19
SO Sets a computing equation Operation mode Yes No 3-20
ER Sets the range of an external input channel Operation mode Yes No 3-20
TJ Sets memory sampling Operation mode Yes No 3-21
SA Sets an alarm Operation mode Yes No 3-21
SW Sets the trend interval and auto save interval Operation mode Yes No 3-22
TI Sets the circular display offset time Operation mode Yes No 3-22
TO Sets how the DX operates after one circular display cycle Operation mode Yes No 3-23
TW Sets the secondary trend interval Operation mode Yes No 3-23
TM Sets manual sampling Operation mode Yes No 3-23
TE Sets sampling conditions for event data Operation mode Yes No 3-23
SZ Sets a zone Operation mode Yes No 3-23
SP Sets a partial expanded display Operation mode Yes No 3-24
ST Sets a tag Operation mode Yes No 3-24
SX Sets a display group (release number 2 or earlier) Operation mode Yes No 3-24
SL Sets a trip line (release number 2 or earlier) Operation mode Yes No 3-24
NX Sets a display group (release number 3 or later) Operation mode Yes No 3-25
NL Sets a trip line (release number 3 or later) Operation mode Yes No 3-25
SG Sets a message Operation mode Yes No 3-25
TH Sets the directory on the external storage medium for Operation mode Yes No 3-25
saving data
TZ Sets a file header Operation mode Yes No 3-26
TF Sets a data file name Operation mode Yes No 3-26
SD Sets the date and time Operation mode Yes No 3-26
TD Sets daylight saving time Operation mode Yes No 3-26
TT Sets the trend display Operation mode Yes No 3-26
SE Sets the line width and the number of grids to use Operation mode Yes No 3-27
on the trend graph
TB Sets the bar graph display Operation mode Yes No 3-27
SB Sets the bar graph for a channel Operation mode Yes No 3-27