Yokogawa Removable Chassis DX1000N - Manual (Page 147)

3-30
IM 04L41B01-17E
p2=MATCHTIMETIMER
Match time timer number
p2=EVENTLEVELSWITCH
Event level switch number
p2=EVENTLEVELSWITCH-OFF
Event level switch numbe
p2=EVENTEDGESWITCH
Event edge switch number
p2=Other Space
p4 Action type
MEMORYSTART/STOP
MEMORYSTART
MEMORYSTOP
TRIGGER
Event trigger
ALARMACK Alarm acknowledge
MATHSTART/STOP
MATHSTART
MATHSTOP
MATHRESET
SAVEDISPLAY
Saves display data to the
external storage medium
SAVEEVENT Saves event data to the
external storage medium
MESSAGE Writes a message
SNAPSHOT
MANUALSAMPLE
TIMERRESET
Resets the relative timer
DISPLAYRATE1/2 Switches the trend interval
DISPLAYGROUPCHANGE Switches the display group
FLAG
Raises a flag
TIMEADJUST Adjusts the time
PANELLOAD Loads settings
ALARMDISPLAYRESET Resets the alarm display
COMMENTDISPLAY
Displays the comment
screen
FAVORITEDISPLAY Displays the favorite
screen
p5 Action details 2
p4=TIMERRESET Timer number
p4=DISPLAYGROUPCHANGE
Display group number
p4=FLAG Flag number
p4=MESSAGE Message number (1 to 100)
p4=PANELLOAD Setup file number (1 to 3)
p4=COMMENTDISPLAY
Comment text block number
p4=FAVORITEDISPLAY
KEY Presses the favorite key
SELECT Specifies a registered screen
p6 Action details 3
p4=MESSAGE Method of specifying the
destination to write the
message
ALL All display groups
SELECT A specific display group
p4=FAVORITEDISPLAY and p5=SELECT
Number of the screen registered to the
favorite key (1 to 8)
p7 Action details 4
p4=MESSAGE and p6=SELECT
Display group number
When multi batch /BT2 is in use
Syntax TU p1,p2,p3,p4,p5,p6,p7,p8
p1 Same as when multi batch is not in use
p2 Same as when multi batch is not in use
p3 Same as when multi batch is not in use
p4 Same as when multi batch is not in use
p5 Action details 2
Same as when multi batch is not in use
except the following:
p4=MEMORYSTART/STOP, MEMORYSTART,
MEMORYSTOP, SAVEDISPLAY,
SAVEEVENT, MATHRESET
ALL All batch groups
SELECT A specific batch group
p4=MATHRESET
ALL All computation channels
SELECT A specific batch group
p6 Action details 3
p4=MESSAGE Method of specifying the
destination to write the
message
ALL All display groups in the batch
group specified using p8
SELECT A specific display group in the
batch group specified by p8
p4=DISPLAYGROUPCHANGE
Batch group number
p4=MEMORYSTART/STOP, MEMORYSTART,
MEMORYSTOP, SAVEDISPLAY,
SAVEEVENT, MATHRESET and
p5=SELECT
Batch group number
p4=MATHRESET and p5=SELECT
Batch group number
p7 Action details 4
p4=MESSAGE and p6=SELECT
Display group number
p4=MESSAGE and p6=ALL
You can specify any value.
The DX returns 1 in response
to this query
.
p8 Action details 5
p4=MESSAGE
Batch group number
Query TU[p1]?
If there is a parameter whose setting is invalid,
the DX responds to queries for that parameter
with a fixed value.
• If p4 = MEMORYSTART/STOP,
MEMORYSTART, MEMORYSTOP,
SAVEDISPLAY, SAVEEVENT, or MATHRESET
and p5 is invalid, the DX returns “ALL.”
• If p4 = DISPLAYGROUPCHANGE and p6 is
3.4 Setting Commands