Yokogawa Removable Chassis DX1000N - Manual (Page 17)

1-9
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
E-mail Transmission
Transmitting e-mail messages
The available types of e-mails are listed below. E-mail can be automatically transmitted
for each item. You can specify two groups of destinations and specify the destination for
each item. In addition, you can set a header string for each item.
• Alarm mail
Reports alarm information when an alarm occurs or clears. Alternatively, reports alarm
information only when an alarm occurs.
• System mail
Notifies the time of the power failure and the time of recovery when the DX recovers
from a power failure.
Notifies the detection of memory end when it is detected.
Notifies the error code and message when a media-related error occurs (an error on
the external storage medium or when the data cannot be stored due to insufficient free
space on the external storage medium).
Notifies the error code and message when an error related to FTP client (when a data
transfer fails using the FTP client function) occurs.
On DXs with the /AS1 advanced security option, this type of e-mail indicates that a
user has been locked (“Invalid user”).
• Scheduled mail
Transmits an e-mail message when the specified time is reached. This can be used
to confirm that the e-mail transmission function including the network is working
properly. You can specify the reference time and the e-mail transmission interval for
each destination.
• Report mail (only on models with the computation function (/M1 or /PM1 option))
Notifies the report results.
For the procedure to set the e-mail transmission function, see section 1.4.
For the e-mail transmission format, see section 1.4.
For the procedure to start/stop e-mail transmission, see section 1.4.
From: [email protected]
Date: Sun, 5 Oct 2003 08:00:45 +0900 (JST)
Subject: Periodic_data
To: [email protected], [email protected]
LOOP1
TEMPERATURE
Time
Host name
DX1000
Time of transmission
10/05 08:00:01
Header 1
Subject
Example of an e-mail sent at a scheduled time
Header 2
E-mail test
• You can send a test message from the DX to the destination to check e-mail
transmissions.
• You can confirm the result of the e-mail test on the e-mail log screen.
• For the procedure to use this function, see section 1.4.
1.1 DX Features