Yokogawa Removable Chassis DX1000N - Manual (Page 10)

1-2
IM 04L41B01-17E
Modbus Server
• A Modbus client device can carry out the following operations on the DX that is
operating as a Modbus server device.
• Load data from measurement, computed,* and external input channels** (using the
input register)
• Load communication input data* (using the hold register)
• Write communication input data* (using the hold register)
• Write to external input channels* (using the hold register)
• Start and stop recording, write messages, and perform other similar operations
(using the hold register; models with release number 3 or later)
• Load the recording start/stop condition, message strings, and other types of data
(using the hold register; models with release number 3 or later)
* /M1 and /PM1 options
• For details on the Modbus function codes that the DX supports, see section 6.3.
• For a description of the settings required to use this function, see section 1.9.
Modbus client device
DX
DX (server)
Ethernet
MW100
1.1 DX Features