Yokogawa Removable Chassis DX1000N - Manual (Page 22)

1-14
IM 04L41B01-17E
When using a fixed IP address
• DHCP
Set DHCP to Not.
• IP address
Set the IP address to assign to the DX.
• Subnet mask
Set the subnet mask according to the system or network to which the DX belongs.
• Default gateway
Set the IP address of the gateway.
• Host name
Set the DX’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• Domain name
Set the network domain name that the DX belongs to using up to 64 characters. You
do not have to set this parameter.
• Server search order
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain suffix search order
Set up to two domain suffixes: primary and secondary.
When obtaining the IP address from DHCP
• DHCP
Set DHCP to Use.
• DNS accession
To automatically obtain the DNS server address, select Use. Otherwise, select Not.
If you select Not, you must set the server search order.
• Host-name register
To automatically register the host name to the DNS server, select Use.
• Host name
Set the DX’s host name using up to 64 alphanumeric characters.
• Domain name
Set the network domain name that the DX belongs to using up to 64 characters.
• Server search order (not necessary when DNS accession is enabled)
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain suffix search order
Set up to two domain suffixes: primary and secondary.
1.3 Connecting the DX