Yokogawa Removable Chassis DX1000N - Manual (Page 29)

1-21
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Configuring the POP3 Server Connection (Release number 3 or later)
Specify how the DX operates when it connects to a POP server.
◊ Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode) and select the Environment tab > Communication > POP3 Details.
Send delay [seconds]
Enter the delay between a POP3 server authentication and the transmission in the range
of 0 to 10 seconds.
POP3 Login
To encrypt the password when logging into the POP3 server, select APOP. To send it in
plain text, select PLAIN.
E-mail Test
◊ Press FUNC and select E-mail test > Recipient1 or Recipient2.
You can send a test e-mail to check the e-mail settings.
Starting/Stopping the E-mail Transmission
Starting the e-mail transmission
◊ Press FUNC and select E-Mail START.
The e-mail transmission function is enabled.
Stopping the e-mail transmission
◊ Press FUNC and select E-Mail STOP.
The e-mail transmission function is disabled. Unsent e-mail messages are cleared.
E-mail retransmission
If the e-mail transmission fails, the message is retransmitted up to three times at 30-s,
1-minute, or 3-minute intervals. If retransmission fails, the e-mail message is discarded.
1.4 Sending E-mail Messages