Yokogawa Removable Chassis DX1000N - Manual (Page 25)

1-17
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Setting the Communication Status
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Ethernet) > Keep alive,
Timeout.
Setting the keepalive
To disconnect when there is no response to the test packets that are periodically sent,
select
On. Otherwise, select Off.
Setting the application timeout
• Selecting On/Off
To use the application timeout function, select
On. Otherwise, select Off. If you select
On, a timeout item is displayed.
• Time
Set the timeout value between 1 and 120 (minutes).
Checking the communication status
The Ethernet communication status can be confirmed with the LED lamp that is provided
on the Ethernet connector on the DX rear panel or the Ethernet link that is shown at the
upper right of the basic setting screen.
1.3 Connecting the DX