Yokogawa Removable Chassis DX1000N - Manual (Page 170)

3-53
Commands
IM 04L41B01-17E
1
2
3
4
5
6
App
Index
YD Sets network parameters
When not obtaining network parameters
automatically
Syntax YD p1,p2,p3
p1 Automatic retrieval (NOT)
When obtaining network parameters automatically
Syntax YD p1,p2,p3
p1 Automatic retrieval (USE)
p2 DNS information retrieval (USE, NOT)
p3 Automatic host name registration (USE,
NOT)
Query YD?
Example Automatically retrieve the IP address and DNS
information and automatically register the host
name.
YDUSE,USE,USE
YA Sets the IP address, subnet
mask, and default gateway
Syntax YA p1,p2,p3
p1 IP address (0.0.0.0 to 255.255.255.255)
p2 Subnet mask
(0.0.0.0 to 255.255.255.255)
p3 Default gateway
(0.0.0.0 to 255.255.255.255)
Query YA?
Example Set the IP address to 192.168.111.24, the subnet
mask to 255.255.255.0, and the default gateway
to 0.0.0.0.
YA192.168.111.24,255.255.255.0,0.0.0.0
YK Sets keepalive
Syntax YK p1
p1 Keepalive (ON, OFF)
Query YK?
Example Disable keepalive.
YKOFF
RU Sets DNS parameters
Server settings
Syntax RU p1,p2,p3
p1 Setting type (SERVER)
p2 Primary DNS server address
(0.0.0.0 to 255.255.255.255)
p3 Secondary DNS server address
(0.0.0.0 to 255.255.255.255)
Suffix settings
Syntax RU p1,p2,p3
p1 Setting type (SUFFIX)
p2 Domain suffix 1 (up to 64 characters)
p3 Domain suffix 2 (up to 64 characters)
Query RU[p1]?
Example Set domain suffix 1 to rec1.daqstation.com and
domain suffix 2 to rec2.daqstation.com.
RUSUFFIX,rec1.daqstation.com,rec2.
daqstation.com
WS Sets a server
Syntax WS p1,p2
p1 Server type (FTP, WEB, MODBUS, SNTP,
ETHERNETIP)
p2 Server on/off (USE, NOT)
Query WS[p1]?
Example Enable the Web server.
WSWEB,USE
WW Sets Webpage parameters
Syntax WW p1,p2,p3,p4
p1 Webpage type
OPERATOR Operator page
MONITOR Monitor page
p2 Webpage (ON, OFF)
p3 Authentication
OFF No authentication
ADMIN Administrator privileges
USER
User privileges
p4 Command input on/off (USE, NOT)
Query WW[p1]?
Example Enable the operator page, disable authentication,
and enable command input.
WWOPERATOR,USE,OFF,USE
Description • Parameters p3 and p4 are valid when p2 is set
to ON.
• Parameter p3 is OFF or ADMIN when p1 is set
to OPERATOR.
• Parameter p4 is valid when p1 is set to
OPERATOR.
• p4 is invalid on models with the /AS1
advanced security option.
YQ Sets communication timeout
When using no timeouts
Syntax YQ p1
p1 Communication timeout (OFF)
Query YQ?
Example Disable the communication timer.
YQOFF
When using timeouts
Syntax YQ p1,p2
p1 Communication timeout (ON)
p2 Timeout value in minutes (1 to 120)
Query YQ?
Example Enable the communication timer and set the
timeout value to 3 minutes.
YQON,3
3.6 Basic Setting Commands