Yokogawa Removable Chassis DX1000N - Manual (Page 21)

1-13
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Setting the IP Address and Host Information
• DX1000
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > IP
address.
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) >
Host settings.
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > DNS
settings.
• DX2000
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > IP
Address, Host settings.
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > DNS
settings.
IP address setting Host name setting
DNS setting
Set the IP address to a fixed IP address or obtain it automatically (DHCP).
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
1.3 Connecting the DX