Watlow Series PD - Manual (Page 48)

W a t l o w S e r i e s P D
■
46
■
C h a p t e r 7 C o n f i g u r a t i o n P a g e
Figure 46 — Network Configuration Web Page Tag Descriptions
Tag # Network Configuration
Parameters
Parameter Description
Device Identification
1. Name Sets the Netbios name.Enter up to 15 alphanumeric characters.
Valid characters are: 0-9, A-Z, a-z, and “-”. The default device name
is PDXXXXXX, where XXXXXX is the serial number. Not all com-
puter networking configurations support Netbios names.
Current Settings
2. IP Address Displays current IP address number. Series PD supports DHCP
client, AutoIP and Fixed IP address assignment.
3. Subnet Mask Displays current subnet mask.
4. Default Gateway Displays current default gateway.
5. DNS Server Displays current DNS server.
IP Address Resolution Method
6. Try DHCP, AutoIP, then Fixed IP Sets the IP address resolution method to try DHCP first. If unsuc-
cessful, try AutoIP next and finally Fixed IP to get an IP address.
7. Try DHCP, then Fixed IP Sets the IP address resolution method to try DHCP first. If unsuc-
cessful, try Fixed IP to get an IP address.
8. Try AutoIP, then Fixed IP Sets the IP address resolution method to try AutoIP first. If unsuc-
cessful, try Fixed IP to get an IP address.
9. Fixed IP Sets the IP address resolution method to Fixed IP to get an IP
address.
Fixed IP Address
10. Fixed IP Fixed IP address, if entered.
11. Subnet Mask Fixed subnet mask, if entered.
12. Default Gateway Fixed default gateway, if entered.
13. Fixed DNS Server Fixed DNS server, if entered.