Watlow Series PD - Manual (Page 120)

W a t l o w S e r i e s P D ■ 118 ■ C h a p t e r 9 D e v i c e C o n f i g T a b l e
Device Configuration > Datalogging > Settings
Datalog - When Log File is FullSpecify action to be taken when the Datalog file if full.,Configuration Datalogging Settings,,No (0)Yes (1),No
(0), (R/W)
Datalog - Logging IntervalSpecify the timed intervals of datalog updates.,Configuration Datalogging Settings,,1 to 200,1,1189-1190 (R/W)
(/1000)
Datalog - Logging Interval UnitsSpecify the units for the datalogging interval.,Configuration Datalogging Settings,,0 = Seconds1 = Min-
utes,Second (0), (R/W)
Datalog - TFTP Transfer IntervalSpecify the time intervals of data transfers to the TFTP server.,Configuration Datalogging Settings,,1 to
999,60, (R/W)
Datalog - When Log File is Full ActionSpecify the action to be taken when the datalog file is full.,Configuration Datalogging Settings,,0 =
Overwrite starting at first file1 = Stop Logging,Overwrite (0), (R/W)
Datalog - TFTP Server NameEnter the TFTP Server Name where datalog files will be transferred.,Configuration Datalogging Settings,,,,
(R/W)
Datalog - TFTP Server IPEnter the TFTP Server IP address where datalog files will be transferred.,Configuration Datalogging Settings,,-
2147483647 to 2147483647,-1062731775, (R/W)
Datalog - Delete All Datalog FilesSelect to clear current datalog file.,Configuration Datalogging Settings,,No (0)Yes (1),No (0),1210 (R/W)
Datalog - EnabledEnable datalogging.,Configuration Datalogging Settings,,No (0)Yes (1),No (0),1209 (R/W)
Datalog - Log Active Process Value 1Specify to include Analog Input 1 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1191 (R/W)
Datalog - Log Active Process Value 2Specify to include Analog Input 2 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1192 (R/W)
Datalog - Log Active Process Value 3Specify to include Analog Input 3 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1193 (R/W)
Datalog - Log Active Process Value 4Specify to include Analog Input 4 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1194 (R/W)
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Datalog - Enabled
Enable datalogging.
Configuration Data-
logging Settings No (0)
Yes (1) No (0) 1209 (R/W)
Datalog - Logging Interval
Specify the timed intervals of
datalog updates.
Configuration Data-
logging Settings 1 to 200 1 1189-1190
(R/W) (/1000)
Datalog - Logging Interval
Units
Specify the units for the data-
logging interval.
Configuration Data-
logging Settings Seconds
Minutes Seconds (R/W)
Datalog - Datalog File
Compression
Select to enable datalog file
compression.
Configuration Data-
logging Settings No (0)
Yes (1) No (0) 1218 (R/W)
Datalog - TFTP Transfer Inter-
val
Specify the time intervals of
data transfers to the TFTP
server.
Configuration Data-
logging Settings 1 to 999 seconds or minutes 60 (R/W)
Datalog - When Log File is Full
Action
Specify the action to be taken
when the datalog file is full.
Configuration Data-
logging Settings Overwrite starting at first
file
Stop Logging Overwrite (R/W)
Datalog - Write Log File to
TFTP Server
Enable datalog files to go to
TFTP server when files are full.
Configuration Data-
logging Settings No
Yes No (R/W)
Datalog - TFTP Server Name
Enter the TFTP Server Name
where datalog files will be
transferred.
Configuration Data-
logging Settings (R/W)
Datalog - TFTP Server IP
Enter the TFTP Server IP ad-
dress where datalog files will
be transferred.
Configuration Data-
logging Settings -2147483647 to 2147483647 -1062731775 (R/W)
Datalog - Delete All Datalog
Files
Select to clear current datalog
file.
Configuration Data-
logging Settings No (0)
Yes (1) No (0) 1210 (R/W)