AMD Geode LX 800@0.9W - Manual (Page 378)

378 AMD Geode™ LX Processors Data Book
Display Controller Register Descriptions 33234H
6.6.20.10 VGA Color Don’t Care
6.6.20.11 VGA Bit Mask
6.6.21 Attribute Controller Registers
The attribute controller registers are accessed by writing an index value to the Attribute Controller Index register (3C0h) and
reading or writing the register using the Attribute Controller Data register (3C0h for writes, 3C1h for reads).
Index 07h
Type R/W
Reset Value xxh
VGA Color Don’t Care Register Bit Descriptions
Bit Name Description
7:4 RSVD Reserved.
3 CM_PR3 Compare Map 3. This bit enables (bit = 1) or excludes (bit = 0) map 3 from participating
in a color compare operation.
2 CM_PR2 Compare Map 2. This bit enables (bit = 1) or excludes (bit = 0) map 2 from participating
in a color compare operation.
1 CM_PR1 Compare Map 1. This bit enables (bit = 1) or excludes (bit = 0) map 1 from participating
in a color compare operation.
0 CM_PR0 Compare Map 0. This bit enables (bit = 1) or excludes (bit = 0) map 0 from participating
in a color compare operation.
Index 08h
Type R/W
Reset Value xxh
VGA Bit Mask Register Bit Descriptions
Bit Name Description
7:0 BT_MSK Bit Mask. The bit mask is used to enable or disable writing to individual bits in each map.
A 1 in the bit mask allows a bit to be updated, while a 0 in the bit mask writes the contents
of the data latches back to memory, effectively protecting that bit from update. The data
latches must be set by doing a frame buffer read in order for the masking operation to
work properly. The bit mask is used in write modes 0, 2, and 3.
Table 6-57. Attribute Controller Registers Summary
Index Type Register Reset Value Reference
-- R/W Attribute Controller Index/Data/Data xxh Page 379
00h-0Fh R/W EGA Palette xxh Page 379
10h R/W Attribute Mode Control xxh Page 380
11h R/W Overscan Color xxh Page 380
12h R/W Color Plane Enable xxh Page 381
13h R/W Horizontal Pel Panning xxh Page 381
14h R/W Color Select xxh Page 382