Yamaha DME - Manual (Page 84)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 84
■ [Store] Button
Stores the contents of the current configuration into the scene selected in the list. If an empty scene
is selected and the contents stored there, a new scene is created. If a scene is already stored in
the selected scene number, it will be overwritten. If [Confirm Scene Store] is checked on the
[Application] tab of the “Preferences” dialog box, a confirmation dialog box will be displayed
before the scene is stored.
When a scene is stored, the configuration parameters at that time are saved as “preset
parameters.”Preset parameters are created automatically.
■ [Recall] Button
Recalls the scene selected in the list and makes it the current scene.
■ [Detail] Button
Expands the dialog box and displays a preset parameters list. If you click the preset parameters
list while it is displayed, the preset parameters list will be hidden. When the dialog box is opened,
its status will be the same as the last time it was closed.
NOTE
The currently logged on user can store scenes at a security level equal to or lower than his or her own only.
NOTE
When the computer and DME/SP2060 unit are online, a scene stored in the DME Designer will also be stored on the DME
or SP2060 unit, regardless of the DME or SP2060 settings.
The DME64N/24N utility display Misc. page [Scene Store] setting only affects store operation from the DME panel
controls.
NOTE
The currently logged on user can recall scenes at a security level equal to or lower than his or her own only.
NOTE
Not available for SP2060 groups.
[Detail] Button
[Del] Button
[Store] Button
[New] Button
[Del Unused] Button
Preset parametersList
DME
preset parameters
DME
preset parameters