Yamaha DME - Manual (Page 406)

Chapter 6 Component Guide
DME Designer Owner’s Manual 406
Notch Filter (Notch)
The notch filter attenuates the signal within a specified frequency band, while passing frequencies
outside that band. There are two types of notch filter components: mono channel and stereo channel.
Mono channel notch filters have one input and one output. Stereo channel notch filters have two of
each.
Double-click a component to display the component editor for it. The parameters are the same for
mono channel and stereo channel components.
Section Parameter Setting Range Function
1 Input Level - ∞ to +10 dB Sets the input signal level.
2 Phase ON/OFF Reverses the phase of the input signal.
3
Notch Frequency 20 Hz to 20 kHz Sets the center frequency.
4 Q: 0.1 to 63.0 Sets the band width of the frequency band
that will be changed
5 Bypass ON/OFF Turns bypass ON.
6
Output Level -
∞ to ±0 dB
Sets the output signal level.
2
1
5
3 4
6
Notch component editor