Yamaha DME - Manual (Page 159)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 159
Network Setup
Click the [Network Setup] item in the [Hardware] menu to open the “Network Setup” window.
This window can be used to set the IP address and device group master/slave status of DME and
SP2060 units.
“Network Setup” Window
Names and Functions
■ MIDI Port List (Tx/Rx)
Selects the device to be set up.
■ Master/Slave
Displays and sets whether the DME or SP2060 unit connected to the port specified by Port Select
is the device group master or slave.
NOTE
These settings can be edited regardless of the current settings of the DME and SP2060 units. The DME Utility screen
Lock page and SP2060 Utility screen User Lock settings only apply to the device panels.
NOTE
DME64N/24N slave devices will not be displayed.
NOTE
The settings cannot be changed for devices in a device group that is online.
NOTE
When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME Satellite unit as the
device group master. Synchronization cannot be performed if a DME64N/24N is assigned as the device group master.