Dme64n cascade connections can now be set – Yamaha DME User Manual
Page 209
Chapter 4 Designer
DME Designer Owner’s Manual
209
Cascade
Turns the DME 64N cascade ON or OFF.
• Show Cascade Port on Configuration Window
Checking this enables cascade.
• [Cascade Setting]
Here you can make settings that apply when cascade is enabled. Clicking here displays the
“Cascade Setting” dialog box.
→ See "Cascade Setting" dialog box on
[OK] Button
Accepts the changed settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
■ “Cascade Setting” Dialog Box
Clicking the [Cascade Setting] button displays the “Cascade Setting” dialog box. Here you can
display DME64E cascade connections and make settings related to them. These settings are
common to the cascaded DMEs in the same zone.
Unit No. (Cascade Connection Number)
All DME units other than the first unit (default “1”) are assigned automatically, and are grayed out
after connection indicating that the settings cannot be changed.
Head Margin
Here you can display and set the head margin for the Cascade connection audio signal. Select [0
dB] or [-18 dB]. All DME Unit No. settings for DME units other than the first unit will be automatically
set to the same value as the first unit when connected. These settings are grayed out after
connection indicating that they cannot be changed.