Yamaha DME User Manual
Page 243
Chapter 4 Designer
DME Designer Owner’s Manual
243
■ Ellipse Object Properties
To display the “Ellipse Properties” dialog box, double-click on an ellipse object, or select an ellipse
object, then click the [Properties] command on the [Edit] menu.
[Width] Box
Specifies the width of the object in pixels. The default is 50 pixels.
[Height] Box
Specifies the height of the object in pixels. The default is 50 pixels.
Line
Sets the line that frames the ellipse.
• [Type]
Displays a list where you can select the type of line to frame the ellipse. The following types
are available: [Solid], [Dash], [Dot], [DashDot], and [DashDotDot].
• [Size] Box
Sets the width of the line that frames the ellipse. This setting can range from 1 to 100 pixels.
• [Select Color] Button
Sets the color of the line that frames the ellipse. Clicking here displays the “Select Color”
dialog box.
For information about the “Select Color” dialog box, see
[Fill Color]
Uncheck this item to make the background of objects transparent. When this item is checked the
[Color] button opens the “Select color” dialog box that can be used to select a background color.
[OK] Button
Accepts the changed settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.