Yamaha DME - Manual (Page 178)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 178
Device Information
Click [Device Information] in the [Hardware] menu to open the “Device Information” dialog box.
The status of DME and SP2060 units connected to the network will be displayed as a list, even if they
are offline or a configuration has not yet been created. This capability allows centralized DME
management for effective troubleshooting and system maintenance.
■ [Reboot]
If this checkbox is checked the [Reboot] button can be clicked to simultaneously reboot multiple
DME and SP2060 units.
■ [Port]
Displays the name of the connected input/output port.
■ [Group]
Displays the name of the device group when online.
■ [Network Status]
Displays the online/offline status as an icon.
■ [Device Label]
Displays the name assigned to the DME or SP2060 unit.
■ [Type]
Displays the device type (DME64N, etc.).
■ [Ver.]
Displays the firmware version number.
■ [C/ES Ver.]
Displays the version number of CobraNet or EtherSound interface for DME Satellite units.
■ [Master/Slave]
Displays the device group master/slave setting.
■ [IP Address]
Displays the IP address.