Yamaha DME - Manual (Page 424)

Chapter 6 Component Guide
DME Designer Owner’s Manual 424
■ Crosspoint
If you click a level meter in the delay
matrix component editor, that group's
[Delay Matrix - Crosspoint] editor
window will be displayed. Adjusts the
send levels from each input channel to
output buses and turns them ON and
OFF. Just like the delay matrix
component editor, the input channels
are arranged vertically while the output
channels are arranged horizontally.
Section Parameter Setting Range Function
1 Input Channel -- Switches to another channel group.
2
Output Channel -- Switches to another channel group.
3 Bus Send Level Delay 0 to 500 ms Sets the delay time for each crosspoint.
4 Level - ∞ to +10 dB Sets the send level for each crosspoint.
5
On ON/OFF Turns ON send for each crosspoint.
6 Block On -- Turns ON all sends in the Crosspoint window. The
[On] button lights up.
7 Off -- Turns OFF all sends in the Crosspoint window.
8
Nominal -- Resets all send levels in the Crosspoint window,
making them 0 dB.
9 Minimum -- Resets all send levels in the Crosspoint window,
making them -
∞ dB.
6
7
9
8
1
2
3
4
5
[Delay Matrix - Crosspoint] editor window