Yamaha DME - Manual (Page 380)

Chapter 6 Component Guide
DME Designer Owner’s Manual 380
■ Crossover
When you click the [Crossover] button for the crossover processor, it opens the crossover editor
window.
7
Navigator Crossover -- This opens the crossover editor window.
8 Delay -- This opens the delay editor window.
9 PEQ -- This opens the parametric equalizer editor
window.
)
Compressor -- This opens the compressor editor window.
Name Function
1
Crossover Curve Displays the level of each frequency band,
distinguished by color.
Section Parameter Setting Range Function
2
Frequency 20 Hz to 20 kHz Sets the cross frequency between each
frequency band.
3 Polarity Normal/Inverted Reverses the output signal phase for each
frequency band.
4 Mute ON/OFF Mutes the signal for each frequency band.
This is linked to the Mute setting in the
original window. The display appears as a
dotted line when muted.
Name Function
1
2
3
4
5
6 7 9 )
8
Crossover Processor II component editor