Yamaha DME - Manual (Page 413)

Chapter 6 Component Guide
DME Designer Owner’s Manual 413
Wav File Player
The Wav File Player is a component for playing Wave files. Only one Wav File Player component can
be arranged for each single DME unit.
Double-click the component to display the component editor for it.
NOTE
If you switch the effect type for SPX components while playing Wave file by Wav File Player, drop-outs in the sound played in
the Wav File Player may occur.
NOTE
When a Wave file is played back while the DME is set to operate at 88.2 kHz or 96 kHz, only the OUT1 output of the Wav File
Player will be delivered via the Left channel. There will be no output from OUT2.
Section Parameter Setting Range Function
1 Ex. Input Level - ∞ to 0 dB Sets the input level from an input port. Only effective
when “External Input” is selected as the playback file.
2
Wav File Player Play 001 to 100 Selects and displays the playback file.
Only files set in the DME unit in which this component
is placed by the Wav File Manager can be selected.
3 List -- Open the Wav File Manager to display a list of files set
in the DME unit in which this component is located.
This list functions as a play list.
4 I G -- Selects the previous file in the play list.
5 HI -- Selects the next file in the playsuit.
6 F
-- Plays the selected Wave file. Mute is turned OFF
when “External Input” is selected.
7 J -- Stops playback of the Wave file. Muted when
“External Input” is selected.
NOTE
Playback will be stopped if synchronization is carried out during playback.
2 4 5 6 7 3
1
Wav File Player component editor