Yamaha DME - Manual (Page 448)

Chapter 6 Component Guide
DME Designer Owner’s Manual 448
Different numbers of channels are provided by each component variation.
Each frequency band has its own color, with Low being red, Mid being green, and so on.
Section Parameter Range Function
7
Delay Delay ON/OFF Applies delay to the crossover response.
8 PEQ PEQ ON/OFF Applies PEQ to the crossover response.
9 Navigator Input Level - ∞ to +10 dB Specifies the input signal level.
)
Crossover – Opens the crossover editor window.
! Delay – Opens the delay editor window.
@ PEQ – Opens the parametric equalizer editor
window.
#
Output Level -
∞ to +10 dB
Sets the output level from each output
channel.
$ Mute ON/OFF Mutes the output of each output channel.
% Limiter – Opens the limiter editor window.
1 Way ALL
2 Way Low/High
3 Way Low/Mid/High
4 Way Low/Low-Mid/High-Mid/High
5 Way Sub-Low/Low/Low-Mid/High-Mid/High
6 Way Sub-Low/Low/Low-Mid/Mid/High-Mid/High