Yamaha DME - Manual (Page 5)

Getting Started
DME Designer Owner’s Manual 5
■ Preset Parameters
The set of parameters for all components in a Configuration is know as the Configuration's “Preset
Parameters”.
■ Scenes
A Configuration and its Preset Parameters are a “Scene”.
DME settings as well as Configuration and Preset Parameter settings are sent from the DME Designer
application running on the computer to the Device Master via USB or Ethernet, allowing each device
to function as a separate processor, independently from the computer. It is also possible to keep the
DME Designer application on line and control the devices in real time.
It is possible to use the DME Designer to create Configurations that include multiple devices when the
appropriate devices are connected.
Although it is possible to have multiple Zones in an Area, multiple Device Groups in a Zone, and
multiple Scenes and Configurations in a Device Group, only one Area, Zone, Device Group and
Configuration can be active and editable via the DME Designer at any one time. The active elements
are known as the Current Zone, Current Device Group, Current Scene, and Current Configuration.
Scenes1
Scenes2
Scene s 999
MATRIX MIXER PARAMETRIC EQ PARAMETRIC EQ DELAY DELAY CROSSOVER
2WAY
COMP/LIMITER
PARAMETRIC EQ DELAY CROSSOVER
2WAY
COMP/LIMITER
COMP/LIMITER GATE
PARAMETRIC EQ DELAY COMP/LIMITER GATE
PARAMETRIC EQ DELAY COMP/LIMITER GATE
PARAMETRIC EQ DELAY COMP/LIMITER GATE
16 x 8
8 BAND
= Components
Æ GATE
• Attack
• Decay
• Range
• Threshold
• Key in
• Hold
Scenes
Composition of scene
Preset
Parameters
Configurations