Yamaha DME - Manual (Page 297)

Chapter 4 Designer
DME Designer Owner’s Manual 297
Save the User Module using the [Save User Module] command on the [Tools] menu. The [Save User
Module] command can be used only when a user module is selected in the Configuration window.
When you select the command, the “Save User Module” dialog box will be displayed. Enter a name for
the User Module, then click the [OK] button.
Set [Double Click Action], [Security Settings], [Default Library], and [User Module Group] at the right
part of the “Save User Module” dialog box.
They correspond to the same items in the “User Module Properties” dialog box. When saved with
different settings than the “User Module Properties” dialog box, the saved settings are immediately
applied.
■ Double Click Action
Initial setting of the window that opens when you double-click on a user module placed in the
component editor.
[Open User Module Design Window]
Opens the User Module Design window.
[Open User Module Editor]
Opens the User Module editor.
■ Security Settings
Initial settings of user module security.
[Enable Security]
Enables user module security.
If you place a checkmark here, the “Set Password” dialog box appears. Enter the same password
into the [Password] box and [Confirm Password] box, and click the [OK] button.