Crossover processor ii – Yamaha DME User Manual
Page 379
Chapter 6 Component Guide
DME Designer Owner’s Manual
379
Crossover Processor II
The following five types of components are available in the Crossover Processor II group: 2 Way, 3
Way, 4 Way, 5 Way, and 6 Way. Crossover processor II components have a single input and 2 to 6
outputs.
Double-click a component to display the component editor for it. The number of bands may vary
depending on the component, but they share a common configuration in the component editor.
There are input and output level meters in the upper part of the window. If you click the [Crossover],
[Delay], [PEQ], or [Compressor] button in the [Navigator] section, an editor for the crossover, delay,
parametric equalizer, or compressor will be displayed in a separate window. A separate component
editor will open for each output channel (such as Low or Mid) when you click on the delay, parametric
equalizer, or compressor.
Name
Function
1
Input Meter
Displays the input signal level.
2
Output Meter
Displays the output signal level.
Section
Parameter
Setting Range
Function
3
Input
Gain
-
∞ to +10 dB
Sets the input signal level.
4
Mute
ON/OFF
Mutes the input signal.
5
Output
Gain
-
∞ to +10 dB
Sets the output signal level for each
frequency band.
6
Mute
ON/OFF
Mutes the output signal for each frequency
band.
2
1
3
4
5 6
)
9
8
7
Crossover Processor II