Fader, Fade – Yamaha DME User Manual
Page 401
Chapter 6 Component Guide
DME Designer Owner’s Manual
401
Fader
Controls the output level for each channel. Fader components are available for 1, 2, 4, 8, 12, and 16
channels.
Double-click a component to display the component editor for it. The number of channels varies, but
all components share a common configuration in the component editor.
■ [Fade]
Sets the action of the fader when there is a large change in its position during scene recall. When
you turn this ON, the fader moves gradually to the position after the jump. If you turn this OFF, it
immediately jumps to the parameters saved in the recalled scene.
See “The ‘Scene Manager’ Dialog Box” (
) for details about settings for the components to
be faded and the time period when the [Fade] is On.
Parameter
Setting Range
Function
1
Phase
ON/OFF
Reverses the phase of the output signal for each
channel.
2
On
ON/OFF
Turns ON each channel’s output.
3
Fader
-
∞ to +10 dB
Sets the output signal level for each channel.
4
Fade
ON/OFF
Sets fade during scene recall ON or OFF.
1
2
3
4
Fader component editor