Delay – Yamaha DME User Manual
Page 451
Chapter 6 Component Guide
DME Designer Owner’s Manual
451
■ Delay
Click the Speaker Processor [Delay] button to open the window. Delay can be set independently
for each output channel.
7
HPF
Type
Thru
6dB/Oct
12dB/Oct AdjustGc
12dB/Oct Butrwrth
12dB/Oct Bessel
12dB/Oct Linkwitz
18dB/Oct AdjustGc
18dB/Oct Butrwrth
18dB/Oct Bessel
24dB/Oct AdjustGc
24dB/Oct Butrwrth
24dB/Oct Bessel
24dB/Oct Linkwitz
36dB/Oct AdjustGc
36dB/Oct Butrwrth
36dB/Oct Bessel
48dB/Oct AdjustGc
48dB/Oct Butrwrth
48dB/Oct Bessel
48dB/Oct Linkwitz
Sets the roll-off slope and filter type for each
octave.
The filter is bypassed when [Thru] is
selected.
8
Frequency
20 Hz to 20 kHz
Sets the HPF cutoff frequency.
9
Gc
-6 dB to +6 dB
Sets the cutoff frequency gain when the
[Type] setting is [AdjustGc] (Adjustable Gc).
Parameter
Range
Function
1
Delay
ms: 0 to 500
Sample: the range
depends on the Fs value.
Meter: 0 to 171.8
Feet: 0 to 563.6
Frame: the range depends
on the Frame value.
Beat: the range depends
on the Beat value.
Sets the delay time.
Two edit boxes show milliseconds and the unit
specified in the [Delay Scale] section.
Sets the output level for each band.
2
On
ON/OFF
Turns delay ON.
3
Delay Scale
ms
Sample
Meter
Feet
Frame
Beat
Selects the delay time units. The selected button will
light and the [Delay] edit box will change accordingly.
When [Beat] is selected the knobs can be used to
adjust BPM.
NOTE
Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on
linking.
Section
Parameter
Range
Function
3
2
1
[Speaker Processor - Delay] editor window