Yamaha DME - Manual (Page 51)

Chapter 2 DME Designer Overview
DME Designer Owner’s Manual 51
When going online is finished, the [Go On-line] button will be grayed out, and the Main Panel
window [On-Line] button will light up. At this point if the [Store Project File into DME after
synchronization] item is checked, the project file will be automatically transferred to the DME unit
and stored. And if the [Close this window after synchronization] item is checked, the window will
close automatically.
To go off line, click either the [ON-Line] button in the main panel window, or the [Go Off-line]
button in the “Synchronization” dialog box.
NOTE
It may not be possible to go online if a scene has not been stored when [Recall Safe] is selected.