Yamaha DME - Manual (Page 440)

Chapter 6 Component Guide
DME Designer Owner’s Manual 440
■ Surround 3-1
Surround 3-1 has four channel surround pan, with three channels in front, and one in the rear. There
is one input and four outputs.
Double-click a component to display the component editor for it.
Section Name/Parameter Setting Range Function
1 2D Surround
Pan Graph 2D Surround
Pan Graph -- Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
2
Speaker Button -- Clicking here moves the sound image to the
button location.
3 Position Left-Right Position L63 - C - R63 Displays and edits the LR surround location.
4 Front-Back Position F63 - C - R63 Displays and edits the front-back surround
location.
5
Divergence Front 0 to 100% Sets the ratio for sending the front-center
signal to front L and front R.
6 Pan Nominal Position Center
LR Selects the nominal position from a menu.
1
3
4
2
3 4
5
6
2
Surround 3-1 component editor