Yamaha DME - Manual (Page 426)

Chapter 6 Component Guide
DME Designer Owner’s Manual 426
Double-click a component to display the component editor for it. The number of input and output
channels varies depending on the component, but all share a common configuration in the
component editor.
The matrix mixer component editor consists of four sections: input, output, matrix, and block. The
[Master] buttons in the [Input] and [Output] sections display windows where you can make master
input and output settings. The level for each channel is set in separate windows that display four
channels each.
NOTE
If a 64 input 64 output Matrix Mixer component or a 64 input 32 output Matrix Mixer component is placed in the DME64N
configuration window, no other components can be used even though the resource meter does not reach 100%.
Section Name Function
1 Input Master Opens the Input Master window.
2
Output Master Opens the Output Master window.
3 Matrix Send level These meters display the send levels from each input
channel to all output buses. Clicking here displays the
Crosspoint window.
4
5
7
6
1
2
3
Matrix Mixer component editor