Exiting calcomp emulation options, Calcomp emulation option comments, Setting the cgm emulation options – Xerox 8825 User Manual
Page 95: Cgm purpose, Setting the default paper size for cgm plots, Vcgl emulation purpose
8825/8830 Controller Setup Manual for Firmware 6.0
79
Configuring the Printer Setup Defaults (continued)
Setting The Versatec Color Graphics
Language (VCGL) Emulation
VCGL Emulation Purpose
The Versatec Color Graphics Language (VCGL) is an older, Xerox
proprietary data format originally designed to work with Xerox Versatec
plotters.
Firmware 6.0 addition of this emulation feature to the 8825/8830 printer
enables legacy VCGL files to be sent to the 8825/8830 printer over Ethernet,
Parallel, Serial, VPI and SCSI ports.
PATH TO VCGL EMULATION OPTIONS
Display
display
press [ENTER], display
[NEXT] until
SELECTING THE VCGL EMULATION OPTIONS
Press ENTER and
default setting for this parameter. Press NEXT to display the three additional
parameters of the VCGL menu. These parameters are VCGL PALETTE
SOURCE = JOB (default), COLOR FILE CONTROL (default), and DEVICE
RESOLUTION = 400 (default).
VCGL PARAMETER DESCRIPTIONS
VCGL Palette =
One factory default (read only) pen palette and eight user-editable pen
palettes are stored within the printer in support of VCGL emulation printing.
Within each of the eight user-editable pen palettes there are 256 pens (pens
0 to 255) whose drawing attributes can be individually specified using the
Printer Control Panel’s
submenu, or using the Printer Management Tool (PMT) installed on a remote
workstation. Depending upon whether the Palette Source Parameter is set to
application, or the pen palette specified by a palette number, will be used to
print your drawing.
Available options include:
VCGL Palette = 0 (read-only).
VCGL Palette = 1-8 (user-editable) as the default VCGL palette.
VCGL Palette Source =
VCGL Palette Source establishes the source of pen attributes to be used in
printing your drawing. Set to
your CAD application. Set to
specified by the
your drawing.