Setting the right margin option, Selecting the raster stamp rotate set option, Exiting the raster stamp rotate set option – Xerox 8825 User Manual

Page 119: Raster stamp scaling mode & numeric option, Purpose of raster stamp scaling mode & numeric, Path to the raster stamp scaling mode option, Right margin purpose

8825/8830 Controller Setup Manual for Firmware 6.0

103

Configuring the Printer Processing Defaults (continued)

Setting the Right Margin option

Right Margin Purpose

The purpose of this option is to set the default value for the right margin of
the print in millimeters.

Range: 0 – 2540 mm

Default: 5 mm

PATH TO RIGHT MARGIN OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.

SELECTING THE RIGHT MARGIN OPTION

Press the ENTER key to change the option. Enter the value desired on the
Keypad (0 - 2540) then press the ENTER key.

EXITING THE BOTTOM MARGIN OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.