Xerox 8825 - Manual (Page 91)

8825/8830 Controller Setup Manual for Firmware 6.0 75
Configuring the Printer Setup Defaults (continued)
Setting The CGM Emulation Options
CGM Purpose
SETTING THE DEFAULT PAPER SIZE FOR CGM PLOTS
This option sets the default paper size for CGM plots that do not have a size
assigned or where both dimensions are greater than 36 inches. The value is
similar to Paper Size but must have 2 dimensions; therefore, ANY or a ROLL
size cannot be used. For “abstract” CGM files, the printed output will be
uniformly scaled to this paper size setting.
Range: ANSI A, ANSI B, ANSI C, ANSI D, ANSI E, LEGAL, ARCH A, ARCH
B, ARCH C, ARCH D, ARCH E, ARCH 30,ISO A0, ISO A1, ISO A2, ISO A3,
ISO A4, ISO B1, ISO B2, ISO B3, or ISO B4
Default: ANSI A
SETTING THE CGM DEFAULT PALETTE
Range: 0 - 8
Default: 0
SETTING THE SOURCE OF CONTROL FOR PENS IN CGM FILES
This option can be set to JOB so that after initialization, the printer default
palette assigned is ignored. Otherwise, set to PRINTER so that the printer
default palette determines the pen settings.
Range: JOB or PRINTER
Default: JOB
OVERRIDING THE JOB TO FORCE BLACK MARKINGS ON WHITE
BACKGROUND
Range: FILE CONTROL or FORCE BLACK ON WHITE
Default: FILE CONTROL
PATH TO CGM EMULATION OPTIONS
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is displayed,
press [ENTER], display , press [NEXT] until
is displayed, press [ENTER], display , press
[NEXT] until is displayed.
SELECTING THE CGM EMULATION OPTIONS
Press the ENTER key to display DEFAULT PAPER SIZE. Press ENTER,
then the NEXT key to toggle available paper sizes. Press the ENTER key
with the desired selection displayed.
Press the NEXT key to toggle to the CGM Palette menu. Press the ENTER
key to change the palette option. Enter the desired palette number (0 - 8) on
the Keypad, then press the ENTER key.
Press the NEXT key to toggle to the Palette Source menu. Press the ENTER
key to change the palette source option. Press the NEXT key to toggle to the
JOB or PRINTER, then press the ENTER key with the desired selection
displayed.
Press the NEXT key to toggle to the Background color menu. Press the
ENTER key to change the background color option. Press the NEXT key to
toggle to the FILE CONTROL or FORCE BLACK ON WHITE, then press the
ENTER key with the desired selection displayed.
EXITING CGM EMULATION OPTIONS
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.