Setting the tiff emulation options, Overriding the job to force black markings on w, Background – Xerox 8825 User Manual
Page 94: Path to cgm emulation options, Selecting the cgm emulation options, Tiff emulation purpose

8825/8830 Controller Setup Manual for Firmware 6.0
78
Configuring the Printer Setup Defaults (continued)
Setting The TIFF Emulation Options
TIFF Emulation Purpose
This option sets the way the Controller processes TIFF job files. The way the
option is set causes the Controller to ignore or use the tag contained in a
TIFF job which sets the minimum code value to black in single bit TIFF data.
When set to IGNORE MIN = BLACK, the Controller will force a white
background with black data even if the file specifies inverted coloring.
Range: FILECONTROL, or IGNORE MIN = BLACK
Default: FILECONTROL
PATH TO TIFF EMULATION OPTIONS
Display
display
press [ENTER], display
[NEXT] until
SELECTING THE TIFF EMULATION OPTIONS
Press ENTER to display the TIFF menu. Press ENTER again to make
changes. Press the NEXT key to toggle the choices, FILE CONTROL or
IGNORE MIN = BLACK. When the desired choice is displayed press the
ENTER key.
EXITING TIFF EMULATION OPTIONS
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.