Setting the number of copies option, Path to job priority option, Selecting the job priority option – Xerox 8825 User Manual

Page 108: Exiting job priority option, Number of copies purpose

8825/8830 Controller Setup Manual for Firmware 6.0

Configuring the Printer Processing Defaults (continued)

Setting the Number of Copies option

Number of Copies Purpose

The purpose of this option is to specify the quantity of copies printed of each
page.

Range: 1 - 999

Default: 1

PATH TO NUMBER OF COPIES OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT], display

SELECTING THE NUMBER OF COPIES OPTION

Press the ENTER key and use the Keypad to change option. Press the
ENTER key to confirm.

EXITING NUMBER OF COPIES OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go
back to ON-LINE mode.